Skip to content
Pro-grade auto-body supply ยท Any quantity
Pro-grade auto-body supply ยท Any quantity

Country

Business accountsNow openApply
Transtar Autobody Technology

Transtar Ultra Flex 4162 Brushable Seam Sealer 11 oz Gray Cartridge

$23.24
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Ultra flex brushable seam sealer is a rapid curing, flexible seam sealer designed for all types of painted surfaces, bare metal and primed surfaces. It is resistant to weather exposure and temperature variations. Paintable and sandable. It remains flexible and seals wet or dry. Use to seal seams in floor pans, fire walls, truck seams, wheel wells, etc. Brush marks duplicate original factory finish. Skins in 5 min. Air drys in 1 hr.

TRANSTAR Ultra Flex 4162 is a brush-applicable seam sealer designed for automotive structural repairs where a flexible, paint-ready finish is required. Formulated as a low-viscosity gray liquid, it fills weld seams, panel gaps and repair joints on a wide range of substrates.

Key performance attributes include a 5-minute work time that allows rapid tacking before flash-off, and a VOC content of 2.82 lb/gal (338 g/L) to meet environmental regulations. The sealer adheres to aluminum, bare metal, e-coat, fiberglass, galvanized steel, OEM plastics, primers, SMC and standard steel, providing consistent coverage without sagging.

Safety handling follows a "Warning" signal word; use eye protection, chemical-resistant gloves, protective clothing and a respirator in a well-ventilated area. The product contains acute toxicity, carcinogenic and flammable components (H225, H315, H350, H360, H370, H372, H401). Follow first-aid instructions for inhalation, skin contact, eye exposure, or ingestion as outlined on the SDS.

Why Pros Choose Transtar Autobody Technology Brushable

  • Skins in 5 min
  • Paintable in 30 min
  • Contains no asbestos
  • Excellent adhesion to primer or bare metal
  • Flexible
  • Will hold brush marks if desired

How to Use

For all types of painted surfaces, bare metal and primed surfaces

  1. Clean and degrease the substrate (aluminum, bare metal, e-coat, fiberglass, galvanized steel, OEM plastic, primer, SMC) to remove contaminants.
  2. Using a brush, apply a uniform coat of TRANSTARยฎ Ultra Flexโ„ข 4162 Seam Sealer over the seam.
  3. Work within the 5-minute work time; allow the sealer to flash for approximately 5 minutes before handling or applying additional coats.
  4. If a second coat is required, repeat steps 2-3 after the first coat has flashed.

Compatibility

Compatible substrates: Bare Metal, Primed Surface.

Specifications

Technical specifications for TRANSTARยฎ Ultra Flexโ„ข 4162 Brushable Seam Sealer, 11 oz Cartridge, Gray, Liquid
Part No. 4162
Product Line TRM
MFR Model 4162
Standard/Approvals California Pro65 Warning: Cancer and Reproductive Harm
Application For all types of painted surfaces, bare metal and primed surfaces
Manufacturer Transtar Autobody Technology
Trade Mark Ultra Flexโ„ข
UPC 845505000250
Brand TRANSTARยฎ
Applicable Materials Bare Metal
Composition 10 to 20% Calcium Carbonate, 19.2% Petroleum Hydrocarbon Resin, 10 to 20% Toluene, 10 to 20% Talc, 1 to 5% Methyl Ethyl Ketone, 3.7% Silica Gel, 1 to 5% Xylene, 0.71% Titanium Dioxide (Dust), 0.7% Ethylbenzene, 0.28% Silica, Crystalline
Application Time 5 min
Paintable (Y/N) Yes
Specific Gravity 1.304
Sprayable (Y/N) No
Odor/Scent Organic Solvent
Color Gray
Flash Point 16 deg F
Container Size (oz) 11
Container Type Cartridge
Form Liquid
Type Brushable
Work Time
5 min
VOC
2.82 lb/gal (338 g/L)
Shelf Life
1 yr
Substrates
Aluminum, bare metal, e-coat, fiberglass, galvanized, OEM, plastic, primer, SMC, steel

About Transtar Autobody Technology

Transtar Autobody Technology is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What surfaces can I use TRANSTARยฎ Ultra Flexโ„ข 4162 on?

The sealer is compatible with aluminum, bare metal, e-coat, fiberglass, galvanized steel, OEM substrates, plastic, primer, SMC, and steel.

How much working time do I have after dispensing?

The product provides a work (flash) time of approximately 5 minutes before it begins to set.

What personal protective equipment is required when applying this sealer?

Use eye protection, chemical-resistant gloves, protective clothing, and a respirator as specified in the SDS.

How long can I store the cartridge before it expires?

The sealed cartridge has a shelf life of up to 1 year when stored under recommended conditions.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Technical and safety documents

How to apply

Steps

1Clean both surfaces to bare, dry substrate.
2Load the cartridge and fit the mixing nozzle.
3Apply an even bead (or clamp) where needed.
4Tool or smooth the joint before it skins over.
5Allow to cure fully before stressing or painting.
Specifications

Full data

BrandTranstar Autobody Technology
Part number4162
UPC845505000250
ApplicationFor all types of painted surfaces, bare metal and primed surfaces
Size11
ColorGray
OriginUS
ConditionNew
Trade MarkUltra Flexโ„ข
SKUTRM.4162.EA
Frequently asked

Good to know

Transtar Autobody Technology TRM is compatible with Bare Metal, Primed Surface. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships Transtar Autobody Technology TRM in a 11 container. Check the autofxmart catalog for other sizes and bulk pricing.
The MPN for Transtar Autobody Technology TRM is 4162. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet โ€” be the first to review this product.