Skip to content
Pro-grade auto-body supply ยท Any quantity
Pro-grade auto-body supply ยท Any quantity

Country

Business accountsNow openApply
U-POL

U-POL RAPTOR 4879 1K Truck Bed Coating 14.3 oz Aerosol Black 8.6 sq-ft Coverage

$23.95
Out of stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

RAPTOR 1K truck bed coating is ideal for protecting truck beds and other vehicle surfaces from impact, scratches, corrosion and water damage. Its 1K formulation gives a durable, abrasion-resistant finish with excellent adhesion to metal, aluminum, fiberglass, plastic and wood. With its clog-free nozzle it isโ€ฆ

U-POL RAPTORยฎ 4879 1K Truck Bed Coating is a high-solids aerosol finish formulated for durable, matte black protection of truck beds and other exterior surfaces. The 14.3 oz can delivers approximately 8.6 sq-ft per coat on properly prepared substrate.

Designed for use at 20 ยฐC (70 ยฐF), the coating adheres to a wide range of substrates including aluminum, steel, fiberglass, wood, OEM paint, e-coat, plastic, primer and SMC. With a VOC content of 545 g/L (4.5 lb/gal), it meets low-emission requirements while providing a tough, chemical-resistant film.

Safety is critical: the product carries a "Warning" signal word and multiple GHS hazards (including acute toxicity, flammability, and respiratory irritation). Apply in a well-ventilated area using eye protection, gloves, protective clothing, and a respirator. Follow first-aid procedures for inhalation, skin contact, eye exposure, or ingestion as outlined in the SDS.

Why pros choose it

  • Durable, impact and abrasion-resistant 1K coating

How to Use

For truck beds, tail gates, running boards, fender flares and more

Compatibility

Compatible substrates: Aluminum, Fiberglass, Plastic, Wood.

Compatible paint systems: 1K.

Specifications

Technical specifications for U-POLยฎ RAPTORยฎ 4879 1K Truck Bed Coating, 14.3 oz Aerosol Can, Black, 8.6 sq-ft Coverage
Part No. 4879
Product Line UPO
Standard/Approvals California Pro65 Warning: Cancer
Application For truck beds, tail gates, running boards, fender flares and more
Manufacturer U-POL
Trade Mark RAPTORยฎ
UPC 5010796111885
Brand U-POLยฎ
Color Black
Coverage (sq-ft) 8.6
Curing Time 3 to 4 hr at 70 deg F
VOC
545 g/L (4.5 lb/gal)
Application Temp.
20 ยฐC / 70 ยฐF
Coverage
8.6 sq-ft per can
Compatible Substrates
Aluminum, e-coat, fiberglass, OEM, plastic, primer, SMC, steel, wood

About U-POL

U-POL delivers pro-grade refinish products including Raptor bed liner, Dolphin glazes, and Power Can aerosols used in shops worldwide.

Frequently Asked Questions

What substrates can U-POL RAPTORยฎ 4879 be applied to?

The aerosol coating is compatible with aluminum, e-coat, fiberglass, OEM finishes, plastic, primer, SMC, steel and wood.

What is the coverage rate for this product?

A single 14.3 oz can provides approximately 8.6 sq-ft of finished coating.

At what temperature should I apply RAPTORยฎ 4879?

The recommended application temperature is 20 ยฐC (70 ยฐF).

What personal protective equipment is required when spraying this aerosol?

Use eye protection, chemical-resistant gloves, protective clothing and a respirator suitable for organic vapors.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Cure & dry schedule

Timing at 77ยฐF

Flash
10 โ€“ 15 minutes between coats
Touch Dry
< 60 minutes
Overcoat
3 โ€“ 4 hours
Dry-Through
3 โ€“ 4 hours
How to apply

Steps

1Read the product's instructions before first use.
2Set it up and check fittings/connections.
3Use steady, even technique for consistent results.
4Clean after use to keep it performing.
5Store dry and protected between jobs.
Specifications

Full data

BrandU-POL
Part number4879
UPC5010796111885
ApplicationFor truck beds, tail gates, running boards, fender flares and more
SizeCN
ColorBlack
OriginUS
ConditionNew
Trade MarkRAPTORยฎ
SKUUPO.4879.CN
Frequently asked

Good to know

this U-POL product is compatible with Aluminum, Fiberglass, Plastic, Wood. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for this U-POL product is 3 to 4 hr at 70 deg F. Drying and curing times may vary with temperature, humidity, and film thickness โ€” always consult the Technical Data Sheet (TDS) for exact cycle conditions.
The MPN for this U-POL product is 4879. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet โ€” be the first to review this product.