Skip to content
Pro-grade auto-body supply · Any quantity
Pro-grade auto-body supply · Any quantity

Country

Business accountsNow openApply
U-POL

U-POL UP0716 — 0716 Fiberglass Filler 900 mL Tin Pale Yellow Paste

$97.83
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Fibral Fiberglass Filler takes the place of short and long strand products and is ideal for bridging holes while providing a tough resistant GRP coating.

Why Pros Choose U-POL UPO

  • Smooth spreading and easy to apply
  • Can be shaped and sanded once cured
  • Completely waterproof
  • Can be sanded and directly top coated in 20 min

How to Use

For bare steel, fiberglass, SMC, rigid plastic, fully cured paint surfaces

Compatibility

Compatible substrates: Fiberglass.

Specifications

Technical specifications for U-POL® UP0716 Fibral Fiberglass Filler, 900 mL Tin, Pale Yellow, Paste
Part No. 0716
Product Line UPO
MFR Model UP0716
Standard/Approvals GHS07, GHS08 Hazard | California Pro65 Warning: Cancer and Reproductive Harm
Application For bare steel, fiberglass, SMC, rigid plastic, fully cured paint surfaces
Manufacturer U-POL
UPC 501079610166
Brand U-POL®
Color Pale Yellow
Mixing Ratio 4% BPO Hardener at 50 deg F, 3% BPO Hardener at 70 deg F, 2% BPO Hardener at 85 deg F
Form Paste
Container Type Tin
Container Size (mL) 900

About U-POL

U-POL delivers pro-grade refinish products including Raptor bed liner, Dolphin glazes, and Power Can aerosols used in shops worldwide.

Frequently Asked Questions

What surfaces can U-POL UPO be used on?

U-POL UPO is compatible with Fiberglass. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.

What size does U-POL UPO come in?

This listing ships U-POL UPO in a 900 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.

What is the mix ratio for U-POL UPO?

U-POL UPO uses a mix ratio of 4% BPO Hardener at 50 deg F, 3% BPO Hardener at 70 deg F, 2% BPO Hardener at 85 deg F. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.

What is the manufacturer part number (MPN) for U-POL UPO?

The MPN for U-POL UPO is 0716. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

Documents & Safety

Why Buy from autofxmart

Technical and safety documents

Cure & dry schedule

Timing at 77°F

Gel time
5 – 6 minutes
Sandable
15 – 20 minutes
Overcoat
20 minutes
How to apply

Steps

1Sand to bare metal and clean the repair.
2Mix filler and hardener to one uniform color.
3Spread thin layers within the work time.
4Let set, then block-sand through the grits.
5Prime before applying topcoat.
Specifications

Full data

BrandU-POL
Part numberUP0716
UPC501079610166
ApplicationFor bare steel, fiberglass, SMC, rigid plastic, fully cured paint surf
Size900
ColorPale Yellow
OriginUS
ConditionNew
FormPaste
SKUUPO.0716.CN
Frequently asked

Good to know

U-POL UPO is compatible with Fiberglass. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships U-POL UPO in a 900 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
U-POL UPO uses a mix ratio of 4% BPO Hardener at 50 deg F, 3% BPO Hardener at 70 deg F, 2% BPO Hardener at 85 deg F. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet — be the first to review this product.