Skip to content
Pro-grade auto-body supply ยท Any quantity
Pro-grade auto-body supply ยท Any quantity

Country

Business accountsNow openApply
U-POL

U-POL GRAVITEX PLUS UP0723 HS Stone Chip Protector, 1 L Bottle, Gray, 4 to 6 hr Curing

$65.56
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

GRAVITEX PLUS is a hard, durable underbody coating that can also be used to reproduce the manufacturer's original stone chip protective finish.

U-POL GRAVITEX PLUS UP0723 is a high-solids stone chip protector designed to provide durable impact resistance on vehicle undercarriages, wheel wells, and lower body panels. This gray-tinted coating creates a flexible barrier that absorbs impacts from road debris while maintaining adhesion to the substrate during vehicle flexing and temperature changes.

The formulation cures in 4 to 6 hours and can be applied in 1 to 2 coats depending on desired protection level. Compatible with aluminum, bare metal, fiberglass, polyester, primer, and SMC substrates, making it suitable for both OEM and aftermarket applications. With a 2-year shelf life in sealed containers and 425 g/l VOC content, proper storage and adequate ventilation are required during application.

Why pros choose it

  • Ready for use 1K formula - no measuring or mixing required
  • Protects against stone chips, salt, rust and dampness
  • Helps to deaden sound and vibrations - ideal for inside engine compartments and panels
  • High build formula covers weld marks and seams
  • Can be painted once dry

Application Guide

  1. Ensure substrates are clean and properly prepared. Compatible with aluminum, bare metal, fiberglass, polyester, primer, and SMC surfaces.
  2. Apply 1-2 coats of GRAVITEX PLUS stone chip protector using appropriate spray equipment.
  3. Allow 4-6 hours curing time between coats and before handling.
  4. Clean equipment immediately after use with appropriate solvent.

Compatibility

Compatible paint systems: 1K.

Specifications

Technical specifications for U-POLยฎ GRAVITEX PLUSยฎ UP0723 HS Stone Chip Protector, 1 L Bottle, Gray, 4 to 6 hr Curing
Part No. 0723
Product Line UPO
MFR Model UP0723
Standard/Approvals GHS02, GHS07, GHS08 Hazard | California Pro65 Warning: Cancer and Reproductive Harm
Manufacturer U-POL
Trade Mark GRAVITEX PLUSยฎ
UPC 501079610187
Brand U-POLยฎ
Container Size (L) 1
Rubberized No
Color Gray
Container Type Bottle
Form Liquid
VOC Content
425 g/L
Shelf Life
2 years in sealed original container
Curing Time
4 to 6 hours
Application Coats
1 to 2 coats
Compatible Substrates
Aluminum, bare metal, fiberglass, polyester, primer, SMC

About U-POL

U-POL delivers pro-grade refinish products including Raptor bed liner, Dolphin glazes, and Power Can aerosols used in shops worldwide.

Frequently Asked Questions

What surfaces can I apply this stone chip protector to?

GRAVITEX PLUS can be applied to aluminum, bare metal, fiberglass, polyester, primer, and SMC substrates.

How long does this take to cure?

The stone chip protector cures in 4 to 6 hours under normal conditions.

How many coats should I apply?

Apply 1 to 2 coats depending on the level of protection required and substrate condition.

What's the VOC content?

This product has a VOC content of 425 g/l, so ensure adequate ventilation and check local regulations for compliance.

How long will this product last in storage?

GRAVITEX PLUS has a shelf life of 2 years from the date of manufacture when stored in the sealed original container.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Technical and safety documents

Cure & dry schedule

Timing at 77ยฐF

Between coats
10 - 15 mins
Dry time
4 - 6 hours
How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2โ€“3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandU-POL
Part numberUP0723
UPC501079610187
ApplicationGRAVITEX PLUS is a hard, durable underbody coating that can also be us
Size1 L
ColorGray
OriginUS
ConditionNew
Trade MarkGRAVITEX PLUSยฎ
SKUUPO.0723.1L
Frequently asked

Good to know

This listing ships this U-POL product in a 1 (1L) container. Check the autofxmart catalog for other sizes and bulk pricing.
The MPN for this U-POL product is 0723. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet โ€” be the first to review this product.