U-POL
U-POL Trim #11 UP0876 High Build Top Coat 450 ml Aerosol Gloss Black
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: Cancer and Reproductive Harm
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
Restores original appearance to body panels, under hood, chassis and wheels.
U-POL Trim #11 UP0876 is a high-build aerosol top coat formulated for automotive trim and interior components. Delivered in a 450 mL can, it provides a durable gloss black finish ideal for one- to two-coat applications on replacement panels, dashboards, and other trim pieces.
Each can covers approximately 48.4 sq ft at the recommended application temperature of 68 °F (20 °C). The formulation adheres to aluminum, OEM plastics, steel, and other common substrates without additional primers, offering consistent film thickness and excellent UV resistance for long-term color stability.
Safety considerations are critical: the product has a flash point of -60 °C and is classified with multiple GHS hazards (including flammability, acute toxicity, and skin corrosion). Use in a well-ventilated area while wearing eye protection, chemical-resistant gloves, protective clothing, and an appropriate respirator. Follow all H-statements on the label for handling and first-aid procedures.
Why Pros Choose U-POL UPO
- Bonds directly to bare steel, aluminum trim flexible plastics, and existing paint surfaces
- Replicates factory look in one coat, drying to a truer black than competitive trim black aerosols
- Restores original appearance to body panels, under hood, chassis and wheels
- Excellent pigment density, essentially single coat coverage
Application Guide
- Clean and degrease the substrate (aluminum, OEM plastic, or steel) to remove all contaminants.
- Verify that ambient temperature is at least 68°F before beginning application.
- Shake the aerosol can thoroughly for a minimum of one minute to ensure uniform dispersion.
- Apply a thin, even coat using a consistent spray pattern. Allow the first coat to flash according to standard practice before proceeding.
- If additional coverage is required, apply a second coat after the first has dried to touch.
Compatibility
Compatible substrates: Bare Steel, Steel, Aluminum, Plastic.
Specifications
| Part No. | 0876 |
|---|---|
| Product Line | UPO |
| MFR Model | UP0876 |
| Standard/Approvals | GHS02, GHS07, GHS08 Hazard | California Pro65 Warning: Cancer and Reproductive Harm |
| Manufacturer | U-POL |
| Trade Mark | Trim #11 |
| UPC | 501079610999 |
| Brand | U-POL® |
| Rubberized | No |
| Color | Black |
| Container Type | Aerosol Can |
| Form | Liquid |
| Finish | Gloss |
- Application Temp.
- 68 °F
- Compatible Substrates
- Aluminum, OEM, Plastic, Steel
- Number of Coats
- 1-2
- Coverage
- 48.4 sq ft per unit
About U-POL
U-POL delivers pro-grade refinish products including Raptor bed liner, Dolphin glazes, and Power Can aerosols used in shops worldwide.
Frequently Asked Questions
What substrates can I apply U-POL Trim #11 to?
It is compatible with aluminum, OEM plastics, and steel surfaces.
How many coats are required for a proper finish?
The product is designed for 1 - 2 coats depending on the desired opacity.
What personal protective equipment (PPE) is required when spraying this aerosol?
Use eye protection, chemical-resistant gloves, protective clothing, and a respirator rated for organic vapors.
What is the coverage rate of one can?
One 450 mL aerosol provides approximately 48.4 sq ft of top-coat coverage.
Can I sand or paint over this coating, and if so, after how long?
Sanding and recoating are possible once the finish is fully cured; the TDS does not specify a cure time, so follow the manufacturer's standard curing guidelines for similar high-build top coats.
Documents & Safety
Signal Word: Danger.
Required PPE: safety goggles or face shield, chemical-resistant gloves, protective clothing (coveralls), and a suitable respirator for spray applications.
Key Hazards: highly flammable aerosol; toxic if inhaled, swallowed, or absorbed through skin; can cause serious eye injury; may be harmful to the environment and is classified as a possible carcinogen and reproductive toxin.
Always refer to the full SDS before use.
Required PPE: safety goggles or face shield, chemical-resistant gloves, protective clothing (coveralls), and a suitable respirator for spray applications.
Key Hazards: highly flammable aerosol; toxic if inhaled, swallowed, or absorbed through skin; can cause serious eye injury; may be harmful to the environment and is classified as a possible carcinogen and reproductive toxin.
Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
Cure & dry schedule
Timing at 77°F
Flash
3 -5 mins
Dust-free
20 - 30 minutes
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
U-POL UPO is compatible with Bare Steel, Steel, Aluminum, Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
Most in-stock orders for U-POL UPO ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of U-POL products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for U-POL UPO is 0876. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
