Valspar
DTM 2008 Direct to Metal 2K Primer - Black
No reviews yet
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
DTM2008 Direct to Metal 2K Primer - Black DTM2008 primer is formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding. This primer emits very low amounts of Volatile Organic Compounds (VOC's), Hazardous Air Polluting Solvents (HAPS), and contain no isocyanates.
VOC: 2.1 to 3.2
Activator: DTMA
National Rule Reducers: 171-174 Uni-Solvent
Exempt Reducers: X01-X02 Uni-Solvent LV, LVB100 Series LV Reducers
Mix Ratio: 4:1:1 Primer, 4:1:2 Sealer
Cure & dry schedule
Timing at 77°F
Flash
10 min
Tape-free
1 hr
Recoat
30 min
Full cure
24 hr
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
