Skip to content
Pro-grade auto-body supply Β· Any quantity
Pro-grade auto-body supply Β· Any quantity

Country

Business accountsNow openApply
High Teck

High Teck Performance Series Enamel Flat Black 9903 12-oz Aerosol

$13.74
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

High Teckβ„’ performance enamel is a high-solids formula that offers a tough, rust-inhibiting coating with maximum performance. This paint is great for indoor or outdoor use, resists chipping/peeling/fading, hides well, and dries to the touch in as little as 5 minutes. Resistant to heat and gasoline, this coating adheres well to metal, fiberglass, and more. For maximum protection, surfaces should be primed with the High Teckβ„’'s 9970 self-etching primer or 9971 sandable primer.

Highβ€―Teckβ„’β€―9903 Performance Series Enamel is a 12‑oz aerosol spray designed for flat‑black finish work on automotive panels and specialty repairs. It is formulated for direct application over e‑coat, fiberglass, primer, and wood substrates, providing a durable, high‑gloss enamel coat that resists abrasion and environmental exposure.

The enamel reaches tack‑free condition in approximately 30β€―minutes, allowing rapid progression to subsequent sanding or coating steps. Its low flash point of –19β€―Β°C (‑2β€―Β°F) enables quick drying in a wide range of shop temperatures, while the aerosol delivery ensures consistent atomization and even coverage on complex shapes.

Use requires standard PPE: eye protection, chemical‑resistant gloves, protective clothing, and a respirator suitable for organic vapors. Apply in a well‑ventilated area to mitigate the flammable and toxic hazards identified in the SDS (GHS hazards include aquatic toxicity, eye damage, and organ toxicity). Follow the H‑statements H222, H280, H319, H336, H361, and H373 for safe handling.

Why pros choose it

  • Flat finish enamel paint
  • Inhibits rust
  • Resists chipping, peeling, fading, heat and gasoline
  • Adheres to metal, fiberglass and more

Application Guide

  1. Clean and dry the substrate (e‑coat, fiberglass, primer, or wood) to remove oil, grease, and contaminants.
  2. Apply the enamel with a smooth, even spray using the aerosol can. Maintain recommended spray distance and overlap.
  3. Allow 30β€―minutes for tack‑free development before handling or applying additional coats.
  4. Reapply additional coats as required, observing the 30‑minute tack‑free interval between each coat.

Compatibility

Compatible substrates: Fiberglass.

Compatible paint systems: Enamel.

Specifications

Technical specifications for High Teckβ„’ 9903 Performance Series Enamel, 12 oz, Aerosol Can, Flat Black
Part No. 9903
Product Line HIT
MFR Model 9903
Standard/Approvals California Prop65 Warning: Cancer and Reproductive Harm
Manufacturer High Teck Products
UPC 813834012985
Brand High Teckβ„’
Solids Content 18%
Color Flat Black
Container Size (oz) 12
Curing Time 5 min To Touch, 30 min Tack Free
Coverage (sq-ft) Up to 15
Tack Free
30 minutes
Compatible Substrates
e‑coat, fiberglass, primer, wood

About High Teck

High Teck is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What substrates can I apply Highβ€―Teckβ€―9903 Performance Series Enamel to?

It is compatible with e‑coat, fiberglass, primer and wood surfaces.

How long does it take before the coating is tack‑free?

The enamel becomes tack‑free in about 30β€―minutes under recommended application conditions.

What personal protective equipment is required when spraying this aerosol?

Wear eye protection, chemical‑resistant gloves, protective clothing, and a respirator approved for organic vapors.

Is the product flammable, and what is its flash point?

Yes, it is a flammable aerosol. The flash point is –19β€―Β°C (–2β€―Β°F).

Documents & Safety

Signal word: Danger.
Required personal protective equipment: safety glasses or goggles, chemical‑resistant gloves, flame‑resistant coveralls or lab coat, and a suitable respirator for organic vapors.
Key hazards: the aerosol is highly flammable with a flash point of –19β€―Β°C, can cause serious eye injury, may irritate skin and respiratory tract, and is toxic to aquatic life and potentially harmful if swallowed or inhaled.
Always refer to the full SDS before use.

Why Buy from autofxmart

  • Authorized distributor β€” authentic, factory-fresh stock.
  • Fast US shipping β€” orders ship within 2 business days, lower 48 only.
  • 30-day returns β€” buy with confidence.
  • Pro-shop pricing β€” bulk discounts available on request.
  • Expert support β€” questions? Email us at support@autofxmart.com.
How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandHigh Teck Products
SKUHIT.9903.CN
UPC813834012985
ApplicationHigh Teckβ„’ performance enamel is a high-solids formula that offers a t
Size12 oz
ColorFlat Black
OriginUS
ConditionNew
Solids Content18%
Frequently asked

Good to know

this High Teck product is compatible with Fiberglass. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for this High Teck product is 5 min To Touch, 30 min Tack Free. Drying and curing times may vary with temperature, humidity, and film thickness β€” always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships this High Teck product in a 12 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet β€” be the first to review this product.

Order in multiples of 6