Skip to content
Pro-grade auto-body supply Β· Any quantity
Pro-grade auto-body supply Β· Any quantity

Country

Business accountsNow openApply
High Teck

High Teck 7603-4 NR/SC Catalyst for Epoxy Primer

$48.49
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

NR/SCCATALYST FOR EPOXY PRIMER

The High Teck Products NR/SC Catalyst for Epoxy Primer is a specialized hardener designed for use with 7600 series epoxy primers in professional collision repair applications. This catalyst enables superior adhesion and corrosion protection on aluminum, steel, and previously primed surfaces, making it essential for multi-substrate repair work.

Mixed at a 1:1 ratio with 7600 series primer, this catalyst provides an 8-hour pot life for extended working time on large jobs. The system flashes in 15 minutes under ambient conditions or 30 minutes at 140Β°F for accelerated processing. With a VOC content of 458.69 g/L, this product meets professional coating requirements while delivering reliable cure performance across approved substrates.

Why pros choose it

  • NR/SCCATALYST FOR EPOXY PRIMER

Application Guide

  1. Ensure substrate (aluminum, steel, or primed surfaces) is properly cleaned and prepared for coating.
  2. Mix 1 part 7600 series epoxy primer with 1 part 7603 catalyst thoroughly. Mixed material has an 8-hour pot life.
  3. Apply epoxy primer system to prepared substrate using appropriate spray equipment.
  4. Allow 15 minutes flash time before handling or applying additional coats.
  5. For accelerated curing, flash at 140Β°F for 30 minutes.

Compatibility

Compatible substrates: Epoxy Primer.

Compatible paint systems: Epoxy.

Specifications

Technical specifications for NR/SCCATALYST FOR EPOXY PRIMER
Part No. 7603-4
Product Line HIT
Manufacturer High Teck Products
UPC 813834016990
Rubberized No
Mix Ratio
1:1 (7600 series : 7603 catalyst)
Flash Time
15 minutes / 30 minutes at 140Β°F
Pot Life
8 hours
VOC Content
458.69 g/L (3.83 lb/gal)
Compatible Substrates
Aluminum, primer, steel

About High Teck

High Teck is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What surfaces can I use this catalyst on?

This catalyst is compatible with aluminum, primer, and steel substrates when mixed with 7600 series epoxy primer.

What's the correct mix ratio for this catalyst?

Mix 1 part 7600 series epoxy primer with 1 part 7603 catalyst for proper activation.

How long is the pot life after mixing?

The mixed epoxy primer has an 8-hour pot life, giving you ample working time for application.

What are the flash times for this product?

Flash time is 15 minutes at room temperature, or 30 minutes when force-dried at 140Β°F.

What's the VOC content of this catalyst?

The VOC content is 458.69 g/L (3.83 lb/gal), which you'll need to factor into your shop's compliance calculations.

Documents & Safety

Danger. Wear safety goggles or face shield, chemical-resistant gloves, long sleeves and coveralls, and a suitable respirator when handling this catalyst. The material is highly flammable, toxic if inhaled or swallowed, can cause serious eye injury, skin irritation, and poses a risk to aquatic life. Use only in well-ventilated areas and keep away from ignition sources. Always refer to the full SDS before use.

Why Buy from autofxmart

  • Authorized distributor β€” authentic, factory-fresh stock.
  • Fast US shipping β€” most orders ship within 1 business day.
  • 30-day returns β€” buy with confidence.
  • Pro-shop pricing β€” bulk discounts available on request.
  • Expert support β€” questions? Email us at support@autofxmart.com.
Cure & dry schedule

Timing at 77Β°F

Pot Life
8 hours
Flash
30 minutes
To topcoat
60 minutes
To sand
Overnight
Flash before force-dry
15 minutes
Force-dry
30 minutes at 140Β° F
How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandHigh Teck Products
SKUHIT.7603-4.QT
UPC813834016990
ApplicationNR/SCCATALYST FOR EPOXY PRIMER
SizeQT
OriginUS
ConditionNew
RubberizedNo
Frequently asked

Good to know

this High Teck product is compatible with Epoxy Primer. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The MPN for this High Teck product is 7603-4. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet β€” be the first to review this product.