Skip to content
Pro-grade auto-body supply Β· Any quantity Β· 23,000+ SKUs in stock
23,000+ pro-grade SKUs in stock
Like 90

Like 90 Particle Control 10008 Floor Coating 1 gal Clear-Light Amber

No reviews yet
$47.96
In stock
Authorized dealer
Ships today
30-day returns
Overview

Built for the job.

Particle Control traps dust and dirt on the floor, preventing defects in your fresh paintwork. Just one application in the morning stays active throughout the day. Use in conjunction with PIG Grippy booth mat or directly on concrete floors. Vacuum (booth mat) or sweep (concrete floor) at the end of the day to remove…

Like90β„’ Particle Control Floor Coating is a clear-to-light amber epoxy system designed for high-traffic shop floors and concrete substrates where dust control and chemical resistance are critical. The 1 gal can provides approximately 1,000 sq ft of coverage per gallon, delivering a uniform, low-sheen finish that resists abrasion and contaminant migration.

The formulation contains less than 60 g/L VOCs, offering compliance with most environmental regulations while maintaining rapid flash time and full cure within typical shop conditions. It adheres to concrete, primed metal, and other prepared substrates without additional bonding agents, ensuring a durable barrier against particle ingress.

Due to acute toxicity, skin corrosion, eye damage, and respiratory hazards, the coating must be applied with appropriate PPE: safety glasses or face shield, chemical-resistant gloves, protective clothing, and a respirator equipped with organic vapor cartridges. Adequate ventilation is required throughout application and curing.

Why Pros Choose Like 90 Particle Control

  • Turns dust into "heavy dirt" - traps airborne dust on the floor resulting in cleaner paintwork. Makes it faster and easier to sweep booth out for the next job
  • Long-lasting formula - Need to apply just twice a day-Even once a day application makes a significant difference
  • Water-based, low VOC - Non-hazardous, environmentally friendly formula
  • Helps prevent corrosion and minimizes unwanted humidity in the paint booth
  • Helps restore floor and grates to original condition and prevents future buildup
  • Controls contamination that results when air flow in the booth is increased to speed dry times

How to Use

For paint booth floors, shop floors

Specifications

Technical specifications for Like90β„’ 10008 Particle Control Floor Coating, 1 gal Can, 100 sq-ft/gal Coverage, Clear to Light Amber
Part No. 10008
Product Line LKE
MFR Model 10008
Application For paint booth floors, shop floors
Manufacturer Like 90
UPC 616641751661
Brand Like90β„’
Color Clear to Light Amber
Type Particle Control
Container Size (gal) 1
Form Liquid
Coverage 100 sq-ft/gal
Coverage
β‰ˆ 1,000 sq ft / gal
VOC
< 60 g/L

About Like 90

Like 90 is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What is the coverage rate for Like90β„’ 10008 Particle Control Floor Coating?

The coating covers approximately 1,000 square feet per gallon when applied at the recommended film thickness.

What personal protective equipment (PPE) is required when applying this product?

Use eye protection, chemical-resistant gloves, protective clothing, and a respirator approved for organic vapors. The material is classified with acute toxicity, skin corrosion, eye damage, respiratory irritation, and other hazards.

What is the VOC content of this floor coating?

The formulation contains less than 60 grams of volatile organic compounds per liter, meeting low-VOC requirements for automotive shop applications.

Documents & Safety

Signal word: Danger
PPE required: safety glasses or goggles, chemical-resistant gloves, protective clothing (coveralls), and a respirator suitable for organic vapors.
Key hazards: toxic if inhaled or swallowed, may cause severe skin burns and eye injury, can affect internal organs and is classified as a carcinogen, poses aquatic toxicity, and acts as an oxidizer.
Always refer to the full SDS before use.

Why Buy from autofxmart

  • Authorized distributor β€” authentic, factory-fresh stock.
  • Fast US shipping β€” most orders ship within 1 business day.
  • 30-day returns β€” buy with confidence.
  • Pro-shop pricing β€” bulk discounts available on request.
  • Expert support β€” questions? Email us at support@autofxmart.com.
Specifications

Full data

BrandLike 90
Part #10008
UPC616641751661
ApplicationFor paint booth floors, shop floors
Size1
ColorClear to Light Amber
OriginUS
ConditionNew
TypeParticle Control
Frequently asked

Good to know

Like 90 LKE provides coverage of approximately 100 sq-ft/gal. Real-world coverage depends on surface texture, porosity, spray pattern, and film build, so pros typically order 10–15% more than the theoretical yield.
This listing ships Like 90 LKE in a 1 (GL) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for Like 90 LKE ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of Like 90 products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for Like 90 LKE is 10008. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet β€” be the first to review this product.