
Fusor 109B 2-Part Medium Bonding Adhesive 1.7 oz Green Paste
Built for the job.
Fusorยฎ 109B adhesive is a two-component, acrylic based metal bonding adhesive offering faster cure time than typical panel bonding adhesives. Fusorยฎ 108B/109B adhesive can be used for panel bonding, weld bonding and rivet bonding of properly prepared quarter panels, rear body panels, roof panels, door skins, van side panels, and outer truck bed panels.
Why Pros Choose LORD Fusor Adhesives 2-Part, Medium
- Snap cure provides fast room temperature cure, resulting in reduced cycle times
- Versatile bonds a variety of metal, including bare metal, steel and aluminum, no welding required, can be riveted and resistance welded
- Environmentally resistant - Acrylic chemistry provides excellent corrosion protection over epoxy adhesives
- Guaranteed corrosion protection
- No welding required
How to Use
For quarter panels, rear body panels, roof panels, door skins, van side panels, outer truck bed panels
Compatibility
Compatible substrates: Bare Metal, Steel, Aluminum.
Compatible paint systems: Epoxy, Acrylic.
Specifications
| Part No. | 109B |
|---|---|
| Product Line | FUS |
| MFR Model | 109B |
| Standard/Approvals | GHS Hazard |
| Application | For quarter panels, rear body panels, roof panels, door skins, van side panels, outer truck bed panels |
| Manufacturer | LORD Fusor Adhesives |
| UPC | 80849810006 |
| Brand | Fusorยฎ |
| Applicable Materials | Steel and Aluminum |
| Composition | 30 to 35% Methyl Methacrylate, 1 to 5% Methacrylate Blend, 1 to 5% Methacrylate Phosphate Ester, 1 to 5% Methacrylic Acid, 0.1 to 0.9%Crystalline Silica, 0.1 to 0.9% N,N-Dimethylaniline, 0.1 to 0.9% Methacrylate Monomer (Part A), 25 to 30% Epoxy Resin, 1 to 5% Dicyclohexyl Phthalate, 1 to 5% Benzoyl Peroxide, 1 to 5% Dibutyl Phthalate, 0.1 to 0.9% Crystalline Silica (Part B) |
| Application Time | 40 min at 70 deg F |
| Component | 2K |
| Odor/Scent | Mild |
| Color | Green |
| Setting Time | 2 hr at 70 deg F |
| Flash Point | 201 deg F |
| Container Size (oz) | 1.7 |
| Container Type | Cartridge |
| Form | Paste |
| Type | 2-Part, Medium |
| Curing Time | 4 hr at 70 deg F |
About LORD Fusor Adhesives
LORD Fusor Adhesives is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What surfaces can this Fusor product be used on?
this Fusor product is compatible with Bare Metal, Steel, Aluminum. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
What is the cure or dry time for this Fusor product?
The curing time for this Fusor product is 4 hr at 70 deg F. Drying and curing times may vary with temperature, humidity, and film thickness โ always consult the Technical Data Sheet (TDS) for exact cycle conditions.
What size does this Fusor product come in?
This listing ships this Fusor product in a 1.7 container. Check the autofxmart catalog for other sizes and bulk pricing.
What is the manufacturer part number (MPN) for this Fusor product?
The MPN for this Fusor product is 109B. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
Documents & Safety
- Safety Data Sheet (SDS)
- fusor_517_catalog.pdf
- fusor_108b_specification_sheet.pdf
- FUSOR_108B_109B_METAL_BONDING_ADH_PT_A_0.pdf
The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.
Why Buy from autofxmart
- Expert support โ questions? Email us at support@autofxmart.com.
Technical and safety documents
Full data
Good to know
What Our Customers Say
No reviews yet โ be the first to review this product.
