Presta Products
Presta 139432 Ultra 2 Step Finishing Polish, 32 oz, Light Gray
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
Presta's Ultra 2-step buffing system was designed to simplify the buffing process, saving you time and money while delivering unparalleled results. This advanced system features water-based products that contain no waxes, fillers or silicones to hide or cover up scratches and imperfections.
Presta Ultra 2 Step® Finishing Polish (139432) is a 32-oz light gray polish formulated for final surface preparation before clearcoat application. It is designed to remove fine scratches, orange peel and oxidation while providing a uniform sheen on a range of body shop substrates.
The formula works efficiently on ABS, aluminum, fiberglass, OEM plastics and other polymeric surfaces, delivering consistent coverage with minimal material waste. Its balanced solvent system allows rapid flash time-approximately 2-3 minutes under typical shop conditions-so technicians can move quickly to the next step without extended drying delays.
Due to its classification as a flammable oxidizer and acute toxicity hazard, use requires eye protection, chemical-resistant gloves, protective clothing and a respirator in well-ventilated areas. Follow standard first-aid procedures for inhalation or eye exposure as outlined in the SDS.
Why Pros Choose Presta Products PES
- Advanced all-in-one polish and swirl remover
- Water-based formula contains no waxes, fillers or silicones
- Creates deep gloss and swirl-free final finish
- Ultra 2 Step Finishing Polish significantly reduces buffing time when used after Ultra 2 Step Cutting Compound
How to Use
For use on both new and aged clear coat paint surfaces
Specifications
| Part No. | 139432 |
|---|---|
| Product Line | PES |
| MFR Model | 139432 |
| Standard/Approvals | OSHA 29 CFR 1910.1200 |
| Application | For use on both new and aged clear coat paint surfaces |
| Manufacturer | Presta Products |
| Trade Mark | Ultra 2 Step® |
| UPC | 075929494322 |
| Brand | Presta |
| Wax vs Polish | Polish |
| Container Size (oz) | 32 |
| Container Size (qt) | 1 |
| Color | Light Gray |
| Container Type | Bottle |
| Form | Liquid |
- Substrates
- ABS, Aluminum, Fiberglass, OEM, Plastic
About Presta Products
Presta Products is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What substrates is Presta Ultra 2 Step® Finishing Polish compatible with?
The polish is approved for use on ABS, aluminum, fiberglass, OEM-finished parts, and other plastics.
What personal protective equipment is required when applying this product?
Use eye protection, chemical-resistant gloves, protective clothing, and a respirator as recommended in the SDS.
Documents & Safety
- Safety Data Sheet (SDS)
- presta_134501_catalog.pdf
- presta_139401_specification_sheet.pdf
- Presta_130901_Catalog.pdf
Signal word: Danger.
Required PPE: wear safety glasses or goggles, chemical-resistant gloves, protective clothing (coveralls), and a suitable respirator when ventilation is inadequate.
This polish is highly toxic if inhaled or swallowed, can cause serious eye injury and skin burns, is flammable, may be carcinogenic, and poses risks to the respiratory system, internal organs, and reproductive health. Always refer to the full SDS before use.
Required PPE: wear safety glasses or goggles, chemical-resistant gloves, protective clothing (coveralls), and a suitable respirator when ventilation is inadequate.
This polish is highly toxic if inhaled or swallowed, can cause serious eye injury and skin burns, is flammable, may be carcinogenic, and poses risks to the respiratory system, internal organs, and reproductive health. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Wash and dry the panel; mask delicate trim.
2Apply a small amount of product to the pad.
3Work in sections at moderate speed and pressure.
4Wipe the residue with a clean microfiber.
5Step to a finer polish to remove any haze.
Specifications
Full data
Frequently asked
Good to know
This listing ships Presta Products PES in a 32 (QT) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for Presta Products PES ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of Presta Products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for Presta Products PES is 139432. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
