Skip to content
Pro-grade auto-body supply · Any quantity
Pro-grade auto-body supply · Any quantity

Country

Business accountsNow openApply
SprayMax

SprayMax® 3680003 — SprayMax Self Etch Primer Gray — 11.2, Light Gray

$16.51
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Excellent corrosion protection Fast drying Welding certificate Can be over coated with all solvent-based and waterborne base coats and 2K top coat systems Can be used as a wash primer with good adhesion properties or as a filler primer with good filling volume depending on-the thickness of application. Ideal for subsequent waterborne base-coats.

SprayMax 1K Self Etch Primer in gray is a single‑component, low‑odor primer formulated for rapid adhesion on a wide range of body shop substrates. It is intended for use as a base coat before topcoats on aluminum, e‑coat, galvanized steel, plastic, polyester, existing primer, and plain steel surfaces.

The primer offers a flash time of 2‑3 minutes, allowing fast re‑coat cycles while maintaining good film build and corrosion resistance. Its zero VOC formulation meets strict environmental requirements without sacrificing performance, and the gray tint provides excellent coverage for uniform finish preparation.

Because the product is classified with a “Warning” signal word and includes acute toxicity, carcinogen, and flammable hazards, technicians must wear eye protection and a suitable respirator, and work in a well‑ventilated area. Follow the SDS for detailed first‑aid procedures.

Why pros choose it

  • Can be used as a wash primer with good adhesion properties or as a filler primer with good filling volume depending on-the thickness of application. Ideal for subsequent waterborne base-coats.

How to Use

For subsequent waterborne basecoats

  1. Clean and degrease the substrate; ensure the surface is free of oil, wax, and loose material.
  2. Apply a uniform coat of 1K Self Etch Primer Gray using a spray gun at the recommended pressure.
  3. Allow the primer to flash for 2–3 minutes before handling or applying additional coats.
  4. After flash, inspect for coverage; if a second coat is required, repeat steps 2‑3.

Compatibility

Compatible substrates: E-Coat.

Compatible paint systems: Waterborne, Solvent, 2K, 1K.

Specifications

Technical specifications for 1K Self Etch Primer Gray
Part No. 3680003
Product Line SPM
MFR Model 3680003
Standard/Approvals GHS02, GHS04, GHS07, GHS08 Hazard | OSHA Hazard | California Pro65 Warning: This Product Can Expose You to Ethylbenzene, Which Causes Cancer
Application For subsequent waterborne basecoats
Manufacturer SprayMax, Peter Kwasny, Inc
UPC 879910000031
Brand SprayMax®
Solids Content 23.6%
Color Light Gray
Container Size (oz) 11.2
Coverage (sq-ft) 5.4 to 8.1
Flash Time
2‑3 min
VOC
0 g/L
Substrates
Aluminum, e‑coat, galvanized, plastic, polyester, primer, steel

About SprayMax

SprayMax 2K aerosols deliver urethane clear, primer, and basecoat performance from a can — ideal for spot repairs and small panels.

Frequently Asked Questions

What substrates can I apply 1K Self Etch Primer Gray to?

The primer is compatible with aluminum, e‑coat, galvanized steel, plastic, polyester, existing primer, and steel surfaces.

How long is the flash time before I can handle the coated part?

Flash time is 2 – 3 minutes under typical shop conditions.

What personal protective equipment is required when spraying this product?

Use eye protection and a respirator approved for organic vapors and aerosols.

Is this primer low in volatile organic compounds?

Yes, it is listed as 0 VOC.

What are the main hazards associated with this primer?

The product carries a “Warning” signal word and is classified for acute toxicity, aspiration hazard, carcinogenicity, compressed gas, eye damage, flammability, oxidizer, reproductive toxicity, and skin corrosion.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Technical and safety documents

How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandSprayMax, Peter Kwasny, Inc
Part number3680003
UPC879910000031
ApplicationFor subsequent waterborne basecoats
Size11.2
ColorLight Gray
OriginUS
ConditionNew
Solids Content23.6%
SKUSPM.3680003.CN
Frequently asked

Good to know

SprayMax, Peter Kwasny, Inc SPM is compatible with E-Coat. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships SprayMax, Peter Kwasny, Inc SPM in a 11.2 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
The MPN for SprayMax, Peter Kwasny, Inc SPM is 3680003. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet — be the first to review this product.