Skip to content
Pro-grade auto-body supply · Any quantity
Pro-grade auto-body supply · Any quantity

Country

Business accountsNow openApply
Transtar Autobody Technology

Transtar 2K Epoxy Primer Sealer/Groundcoat 6131 Gray 1 Gal 1:1:10 Mix

$214.26
In stock
Shipping costs are shown at checkout. View shipping policy.
Freight item · $3,500 order minimum Oversized items ship by freight carrier only. We can only ship it on orders of $3,500 or more, where a $250.00 flat freight charge applies. Smaller orders will not show a shipping option at checkout.
Overview

Built for the booth.

2K epoxy primer sealer/ground coat is an exceptional lead and chromate free corrosion resistant coating with excellent adhesion on a variety of properly prepared surfaces. 2K epoxy primer sealer/ground coat improves adhesion of body fillers and resists moisture damage caused by water permeation. If further reduced, this product may be used as a pre-coat or sealer/ground coat prior to top coating.

Why pros choose it

  • Exceptional adhesion and corrosion resistance over bare metal
  • Improves adhesion of body filler
  • Resists moisture damage caused by water permeation, when body filler is put over primers

How to Use

For use on bare steel, aluminum and galvanized surfaces

Compatibility

Compatible substrates: Bare Metal, E-Coat, Epoxy Primer, Body Filler.

Compatible paint systems: Epoxy, 2K.

Specifications

Technical specifications for TRANSTAR® 6131 2K Epoxy Primer Sealer/Groundcoat, 1 gal Can, Gray, 1:1:10 Mixing, 520 sq-ft/gal at 1 mil Coverage
Part No. 6131
Product Line TRM
MFR Model 6131
Standard/Approvals California Pro65 Warning: Cancer and Reproductive Harm | GHS and OSHA Hazard
Application For use on bare steel, aluminum and galvanized surfaces
Manufacturer Transtar Autobody Technology
UPC 845505000755
Brand TRANSTAR®
Maximum Sale Quantity 2
Maximum Sale Day 7
Rubberized No
Solids Content 47.73%
Color Gray
Container Size (qt) 1
Container Type Can
Form Liquid
Container Size (gal) 1
Mixing Ratio 1:1:10

About Transtar Autobody Technology

Transtar Autobody Technology is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What surfaces can this TRANSTAR product be used on?

this TRANSTAR product is compatible with Bare Metal, E-Coat, Epoxy Primer, Body Filler. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.

What size does this TRANSTAR product come in?

This listing ships this TRANSTAR product in a 1 (GL) container. Check the autofxmart catalog for other sizes and bulk pricing.

What is the mix ratio for this TRANSTAR product?

this TRANSTAR product uses a mix ratio of 1:1:10. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.

What is the manufacturer part number (MPN) for this TRANSTAR product?

The MPN for this TRANSTAR product is 6131. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

Documents & Safety

Why Buy from autofxmart

Technical and safety documents

Get the mix right

Mix & coverage calculator

Locked to this product's ratio of 1:1:10 (clear : hardener).

Clearcoat to spray
5L
Your batch1:1:10
Clearcoat5
Hardener2.5 L
Ready to spray7.5 L
How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandTranstar Autobody Technology
Part number6131
UPC845505000755
ApplicationFor use on bare steel, aluminum and galvanized surfaces
Size1 gal
ColorGray
OriginUS
ConditionNew
RubberizedNo
SKUTRM.6131.GL
Frequently asked

Good to know

this TRANSTAR product is compatible with Bare Metal, E-Coat, Epoxy Primer, Body Filler. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships this TRANSTAR product in a 1 (GL) container. Check the autofxmart catalog for other sizes and bulk pricing.
this TRANSTAR product uses a mix ratio of 1:1:10. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet — be the first to review this product.