Skip to content
Pro-grade auto-body supply ยท Any quantity
Pro-grade auto-body supply ยท Any quantity

Country

Business accountsNow openApply
US Chemical & Plastics

USC 2815-4 Activator 1 qt Liquid, Mix Ratio 4:1, for 2K Urethane Primer Surfacer

$58.24
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the booth.

A production-centric primer surfacer that builds, dries and sands fast and easy.

USCยฎ 2815-4 Activator is a liquid hardener formulated for use with US Chemical & Plastics 2K urethane primer surfacer. It is applied at a mix ratio of four parts primer to one part activator, providing the chemical cure needed for high-performance urethane coatings in collision repair.

The activator delivers a pot life of up to two hours when mixed at 75 ยฐF and 50 % relative humidity, giving technicians ample working time on complex panels. It achieves an estimated coverage of 5.12 sq ft per US gallon of mixed material and is compatible with plastic substrates and previously applied primer layers, ensuring consistent film build and adhesion.

Handling requires standard PPE: eye protection, chemical-resistant gloves, protective clothing, and a respirator in well-ventilated areas. The product carries a "Warning" signal word and lists acute toxicity, aspiration hazard, carcinogenicity, flammability, and skin corrosion among its GHS hazards, so proper ventilation and decontamination procedures must be followed.

Why Pros Choose US Chemical & Plastics USC

  • A production-centric primer surfacer that builds, dries and sands fast and easy.

Application Guide

  1. Mix USCยฎ 2815-4 Activator with the 2K urethane primer surfacer at a ratio of 4 parts primer to 1 part activator.
  2. Work within the 2-hour pot life (measured at 75 ยฐF / 50 % RH) to ensure optimal reactivity.
  3. Apply the mixed material uniformly to the prepared substrate (plastic or primed surface). Coverage is approximately 5.12 sq ft per US gallon; adjust spray volume accordingly.

Compatibility

Compatible paint systems: Urethane, 2K.

Specifications

Technical specifications for USCยฎ 2815-4 Activator, 1 qt, Liquid, Use With: 2K Urethane Primer Surfacer
Part No. 2815-4
Product Line USC
MFR Model 2815-4
Standard/Approvals California Pro65 Warning: Cancer and Reproductive Harm
Manufacturer US Chemical & Plastics
UPC 037307890874
Brand USCยฎ
Rubberized No
Container Size (qt) 1
Form Liquid
Mixing Ratio 4:1
Mix Ratio
4 parts 2820 2K urethane primer surfacer
Pot Life
2 hours @ 75 ยฐF / 50 % RH
Coverage
5.12 sq ft per US gallon

About US Chemical & Plastics

US Chemical & Plastics is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What substrates are compatible with USCยฎ 2815-4 Activator?

It is approved for use on plastic and primed surfaces.

How much area does one quart of the activator cover?

The product provides approximately 5.12 sq ft per US gallon; a quart (ยผ gal) will cover roughly 1.28 sq ft.

What personal protective equipment is required when handling this activator?

Use eye protection, chemical-resistant gloves, protective clothing, and a respirator as specified in the SDS.

What is the pot life of the mixed system?

The mixed primer/activator has a pot life of about 2 hours at 75 ยฐF (24 ยฐC) and 50 % relative humidity.

What is the recommended mix ratio for this activator?

Mix 4 parts of USCยฎ 2820 2K urethane primer surfacer with the activator as specified by the manufacturer.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Get the mix right

Mix & coverage calculator

Locked to this product's ratio of 4:1 (clear : hardener).

Clearcoat to spray
5L
Your batch4:1
Clearcoat5
Hardener2.5 L
Ready to spray7.5 L
How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2โ€“3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandUS Chemical & Plastics
Part number2815-4
UPC037307890874
ApplicationA production-centric primer surfacer that builds, dries and sands fast
Size1 qt
OriginUS
ConditionNew
RubberizedNo
Container Size (qt)1
SKUUSC.2815-4.QT
Frequently asked

Good to know

This listing ships this USC product in a 1 (QT) container. Check the autofxmart catalog for other sizes and bulk pricing.
this USC product uses a mix ratio of 4:1. Always measure activators and reducers accurately to maintain film properties and pot life โ€” deviating from the ratio can cause adhesion or curing problems.
The MPN for this USC product is 2815-4. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet โ€” be the first to review this product.