Skip to content
Pro-grade auto-body supply ยท Any quantity
Pro-grade auto-body supply ยท Any quantity

Country

Business accountsNow openApply
US Chemical & Plastics

USC 32035 Red Glazing Putty 1 lb Paste/Gel Tube

$13.66
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Red Glazing Putty is a one component, fast-drying glazing putty ideal for use under lacquer, acrylic, and synthetic finishes. The extremely fine texture of Red Glazing Putty fills pinholes, scratches and dimples on bare metal and hardened plastic fillers.

USCยฎ 32035 Red Glazing Putty is a readyโ€‘toโ€‘use paste/gel formulated for highโ€‘quality red finishes on automotive panels. It is designed for quick touchโ€‘up, colorโ€‘matching, and final glaze applications where a uniform, deepโ€‘red appearance is required.

The putty reaches a tackโ€‘free state in 30โ€ฏminutes when applied to a thickness of 1/32โ€ฏin. or less, allowing rapid reโ€‘work and sanding. It adheres to a broad range of substrates, including aluminum, bare metal, OEM surfaces, plastics, and primed panels, providing consistent coverage without additional bonding agents. The formulation contains 450โ€ฏg/L VOCs, delivering a balance of performance and regulatory compliance.

Because the product is classified with a โ€œWarningโ€ signal word and includes hazards such as acute toxicity, skin corrosion, and flammability, proper personal protective equipment is mandatory. Use eye protection, chemicalโ€‘resistant gloves, protective clothing, and a respirator in a wellโ€‘ventilated area. The estimated flash point is 40โ€ฏยฐF (4.4โ€ฏยฐC), so keep away from ignition sources.

Why Pros Choose US Chemical & Plastics USC

  • Best under lacquer, acrylic and synthetic finishes
  • Good adhesion, easy sanding, minimal shrinking

How to Use

For use to repairs scratches, pinholes and other imperfections both over and under primer

  1. Clean the substrate (aluminum, bare metal, OEM, plastic, or primed surface) to remove grease, oil, and loose particles; ensure the surface is dry.
  2. Use the product directly from the tube โ€“ it is readyโ€‘toโ€‘use and requires no mixing.
  3. Apply a thin, even coat with a putty knife or spatula, spreading to a thickness of 1/32 inch (0.8โ€ฏmm) or less.
  4. Allow the coat to dry for approximately 30โ€ฏminutes at ambient temperature before handling or applying additional coats.
  5. If a second coat is required for coverage, repeat steps 3โ€‘4, allowing 30โ€ฏminutes drying between coats.

Compatibility

Compatible substrates: Bare Metal, Plastic.

Compatible paint systems: Lacquer, Acrylic.

Specifications

Technical specifications for USCยฎ 32035 Red Glazing Putty, 1 lb Tube, Paste/Gel
Part No. 32035
Product Line USC
MFR Model 32035
Standard/Approvals California Pro65 Warning: Cancer and Reproductive Harm
Application For use to repairs scratches, pinholes and other imperfections both over and under primer
Manufacturer US Chemical & Plastics
UPC 037307320357
Brand USCยฎ
Maximum Sale Quantity 12
Maximum Sale Day 7
Color Iron Oxide Red
Form Paste/Gel
Container Type Tube
Mix Ratio
Ready to use
Dry Time
30โ€ฏminutes (1/32โ€ณ or less)
VOC
450โ€ฏg/L
Compatible Substrates
Aluminum, bare metal, OEM, plastic, primer

About US Chemical & Plastics

US Chemical & Plastics is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What substrates can I apply USCยฎ 32035 Red Glazing Putty to?

It is compatible with aluminum, bare metal, OEM finishes, plastic, and primed surfaces.

How long does the putty take to dry?

Dry time is approximately 30โ€ฏminutes for a film thickness of 1/32โ€ฏinch or less.

What personal protective equipment is required when using this product?

Wear eye protection, chemicalโ€‘resistant gloves, protective clothing, and a respirator as recommended in the SDS.

Can I sand and paint over the cured putty?

Yes. Once fully cured, the putty can be sanded to the desired finish and painted over.

Documents & Safety

Signal Word: Warning.
Personal protective equipment required: safety glasses or goggles, chemicalโ€‘resistant gloves, protective clothing (coveralls or apron), and a respirator suitable for organic vapors.
Key hazards: toxic if inhaled or swallowed, may cause serious eye damage and skin burns, flammable, harmful to aquatic environments, suspected carcinogen, and may affect reproductive health.
Always refer to the full SDS before use.

Why Buy from autofxmart

  • Authorized distributor โ€” authentic, factory-fresh stock.
  • Fast US shipping โ€” orders ship within 2 business days, lower 48 only.
  • 30-day returns โ€” buy with confidence.
  • Pro-shop pricing โ€” bulk discounts available on request.
  • Expert support โ€” questions? Email us at support@autofxmart.com.
How to apply

Steps

1Wash and dry the panel; mask delicate trim.
2Apply a small amount of product to the pad.
3Work in sections at moderate speed and pressure.
4Wipe the residue with a clean microfiber.
5Step to a finer polish to remove any haze.
Specifications

Full data

BrandUS Chemical & Plastics
SKUUSC.32035.TB
UPC037307320357
ApplicationFor use to repairs scratches, pinholes and other imperfections both ov
SizeTB
ColorIron Oxide Red
OriginUS
ConditionNew
FormPaste/Gel
Frequently asked

Good to know

this US Chemical & Plastics product is compatible with Bare Metal, Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The MPN for this US Chemical & Plastics product is 32035. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet โ€” be the first to review this product.